Lease Program

hits counter

Lease Program

Glass Body
	The 24’ custom built glass truck body is equipped with a front 4’x 8’x 8’ steel compartment, side entrance door and hinge-down ladder. The rear twenty feet of the body has a steel body framework that accommodates the glass panels, steel tube top rail, bottom rail, corner posts and center side posts with an aluminum enclosed front wall. The electrical components include: 20 kW generator in sound attenuated properly vented compartment and a 5-ton split air conditioning system, which has a condenser/evaporator system with resistance heat and is mounted in the roadside skirt. The evaporator units are mounted in the floor. The body includes two side panels ½” x 7’ x 9’ clear tempered glass panels on each side of body with center side post. The rear wall is ½” clear tempered glass panel with center glass swing door. The truck body also includes a removable custom platform/stair/railing assembly.

Truck Body Kitchen
	The 24’ truck body Kitchen unit includes the following: TRUE Freezer Model #T-35F, Impinger II by Lincoln oven, Vent hood with roof mounted ventilator fan, John Deere 12 kW Generator, a three- compartment sink and hand wash sink, two roof mounted A/C units and an 8’ power awning above serving window, which does not include fabric. The truck includes a 30 gallon fresh water tank and a 55 gallon waste tank and the generator must be plumbed to the chassis fuel tank. The unit includes a stainless steel work table across the front of the truck body and a step-well on curb side, which has a self-closing serving window.

Gooseneck
	The 38’ enclosed, tandem axle, gooseneck trailer is equipped with a 144” wide opening on one side of trailer, hinge-down stage in opening and stage section including perimeter railing system with (2) stair/rail assemblies. The interior includes track lighting with (12) light fixtures, including a dimmer switch. The stage is covered with TuffCoat and is complete with a power awning, not including fabric. The electric components include: 20 kW Onan generator in sound attenuated properly vented compartment located in gooseneck, including 100-amp load center, fuel tank and life line.

Double Expandable Semi
	The Double Expandable Semi Trailer is a custom built aluminum enclosure on a platform base trailer with tandem axle air ride suspension. A four-point hydraulic leveling system is incorporated into the trailer frame. The exterior dimensions are as follows: 53’ overall length, 11’ in front of drop/42’ behind drop, 20” drop, 13.5’ overall height and 8.5’ overall width. The trailer has 1½ inches of foam insulation in the trailer ceiling and wall, (2) hydraulically operated 8’ x 38’ expandable sections, (1) on curbside and (1) on roadside of trailer. The sidewalls of the trailer hinge up to become ceiling, the floor folds down, and long walls have bi-fold end walls that extend out to form side walls of expandable sections. The expandable sections include manually operated outriggers for stabilization. The trailer has full length belly boxes on both sides, between drop and suspension and metal skirting to extend to the rear of trailer behind the suspension. The electrical components of the Double Expandable Semi Trailer include a 40 kW generator in sound attenuated properly vented compartment located in front of trailer with exterior access door and 200 amp control panel.

Semi Trailer with Stage
	The Semi Trailer Stage Trailer is a custom built aluminum enclosure on a flatbed trailer with tandem axle air ride suspension. A four-point hydraulic leveling system is incorporated into the trailer frame. The exterior dimensions are as follows: 53’ overall length, 11’ in front of drop/42’ behind drop, 20” drop, 13.5’ overall height and 8.5’ overall width. The trailer has (1) 8’ x 38’ hydraulically operated hinge up canopy/ hinge down stage on one side of trailer. The stage includes (2) stair and hydraulic systems and a full perimeter railing system. An exterior access door into the storage area is included. The trailer has full length belly boxes on both sides, between drop and suspension and metal skirting to extend to the rear of the trailer behind the suspension. The electrical components of the Semi Trailer Stage Trailer include a 20 kW generator in sound attenuated properly vented compartment located on front of trailer with exterior access door and 200-amp control panel.

Pod
	The container is 20’ long by 8’ wide with a 17’ x 8’ stage on the side and a 7’ x 8’ stage on the rear. The two stages are joined together by a series of stage decks. The front 4’ of the pod forms a control room to house a/v and the load center. This room would be converted to a generator room should the need arise. The Pod can be customized into any of the following: single unit, multi-unit and multi-level configurations. The Pod setup is relatively quick- the unit is fork-lifted into place, then ceiling-mounted winches are used to unfold the Pod in preparation for show mode.